Herse à dents Flex harrow Green Way 7 m neuve

The working on the harrow – tooth has a knife-like (oval) cross section and is made of high-strength steel. The teeth are spaced at the rate of 70 teeth per 1 m of the capture. The rhombic cross section of the tooth compared to the standard square cross-section of the teeth, which are equipped with most of the boron allows the provision of all technological operations reduce the load on the tractive effort of the tractor to 20%, which in turn allows you to use the tractor capacity 80-370л.with. for mounting with harrow width from 5 to 24m.  Teeth zakrepleniya transverse rods hinged together at 16-row loop. And this, in turn, allows us to qualitatively replicate the topography in the process.
the design of the Train-harrow mounted on a compact frame allowing to transport the harrow when moving from field to field without additional support and is made of high quality profiled bars. Train-harrow is equipped with hydraulic actuators, allowing for 3-5 min to transfer the unit from transport to working position and back.


When using the harrow on heavy soils available option heavy loops with reinforced teeth which are installed behind the wheels of the tractor, where the maximum compaction of the soil.
For higher performance, harrows rekomenuem to use a 16-row loop.
Each 16-row loop consists of two parts via the 8-series, which can be set individually if necessary, for example, when excessive debris field or lack of power of the tractor.

Performance at a speed of 12km/h, hectare/h : 8,6
working speed, km/h : 8-15
Transport speed, not more, km/h : 20
working width, m : 7,2
working length, m : 9,36
the aggregate Type : trailing
the working depth of tillage, mm : 20-80
the Number of loops, m : 4
the Number of rows in the loop, m : 8*2=16
the Number of teeth standard piece : 480
the Number of teeth on the length of 300mm, PCs : 20
adjustable angle of attack teeth (6 positions) : 38° and 50° plus 4 additional
length : 4,75
width, m : 2,8
height, m : 3,7
the power of the tractor not less than, L. S. : 120
the Minimum number of hidrofugados : 2
the Pressure in the hydraulic system of the tractor bar : 180
Weight, kg : 2120